Support

Customer Support

Repairs, re-tensioning, inspections and advice for invisible grills. Talk to the YPL Invisible Grill team on +91 96000 35014.

Smiling headset-wearing man seated at a desk in a bright office with white shelving.

Phone and email support, open daily
Inspection and re-tensioning on request
Cable and anchor replacement
Advice for grills we did not install

How to reach us

Phone +91 96000 35014 — the fastest way to get someone on site
Email yplinvisiblegrill@gmail.com — send photos and we will tell you what is needed
Visit 40/17, New St, Kannammapet, T. Nagar, Chennai, Tamil Nadu 600017
Open daily, 5:00 am – 10:00 pm

What we handle after install

A cable that has gone slack or been cut
An anchor that has pulled out of soft plaster
Re-tensioning after building settlement or a moved railing
Adding a release panel so a section can be opened for cleaning
Replacing an iron grill you are tired of, using the same holes where possible
Bird netting and pigeon proofing on the same ledge

If your grill was fitted by someone else

Bring us the grade and the spacing and we will match it, or tell you honestly when the existing anchors cannot be trusted and need to be reset. We will not sell you a whole new panel when one run needs replacing.

Common questions

A cable has gone slack — is it dangerous?

One slack run does not make the panel unsafe, but it should be re-tensioned. Call us and we will come out, check the whole panel and re-tension the affected runs.

Do you charge for an inspection?

Tell us what you are seeing on the phone first — often a photo is enough for us to say what is needed and what it will cost before anyone travels.

Can you repair a grill fitted by another company?

Usually yes. We match the grade and spacing where the anchors are sound, and we tell you honestly when they are not and need to be reset.

How often should the grill be checked?

A wipe down every few months is all the routine care it needs. If a cable ever feels slack, is cut, or an anchor moves, call us straight away rather than waiting for a schedule.

Invisible grill price in Chennai

We charge per square foot of opening, and the rate includes the cable, anchors, track and installation by our own team. There is no separate labour bill. The minimum job size is 50 sq ft. Your exact rate depends on the cable grade, the spacing and the floor height, which is why every quote starts with a free site visit and a tape measure, not a guess over the phone.

Product	Rate per sq ft	Typical use
Pigeon / bird safety net	₹110 – ₹180	Balconies, ducts, utility areas
Window invisible grill	₹160 – ₹230	Bedroom and kitchen windows, French doors
Balcony invisible grill	₹220 – ₹350	Open balconies, high floors, sea-facing flats

Example job	Approx. area	Guide price
Single bedroom window	50 sq ft (minimum)	₹8,000 – ₹11,500
2BHK balcony	80 sq ft	₹17,600 – ₹28,000
3BHK balcony + utility	140 sq ft	₹30,800 – ₹49,000
Staircase void (villa)	120 sq ft	₹26,400 – ₹42,000

These example figures are worked out from our per-square-foot rates to give you a feel for the budget. Your written quote after the site visit is the final price.

Stainless steel grades we use

Grade	Best for	Why
SS 304	Inland flats, windows, low to mid floors	Good rust resistance at a lower price
SS 314	High floors, wide balconies	Higher strength and heat resistance
SS 316 (marine grade)	Sea-facing homes — ECR, OMR, Besant Nagar, Thiruvanmiyur	Molybdenum content resists salt air corrosion

All cables are nylon coated, which protects the steel from dust and salt, keeps them smooth to touch for children and stops the metallic shine that makes ordinary wire stand out. Cable spacing is usually 2 to 3 inches — close enough that a child's head cannot pass through.

Invisible grill vs MS grill vs safety net

	Invisible grill	MS / iron grill	Safety net
View and light	Almost fully open	Blocked by bars	Slightly hazy
Rust	None (stainless)	Rusts, needs painting	None
Child safety	Very high	High	Medium
Society approval	Usually allowed	Often banned on facade	Usually allowed
Life span	10+ years	Depends on painting	3 – 5 years
Emergency escape	Release panel possible	Difficult	Can be cut

How we install an invisible grill

01
Free site visit
We visit your home, measure every opening and check the wall material and floor height.
02
Written quote
You get a clear per-sq-ft quote with the grade, spacing and total — no hidden charges.
03
Track and anchor fitting
Aluminium tracks are fixed to the top and bottom with anchor bolts suited to concrete, brick or block.
04
Cable tensioning
Each stainless cable is threaded, pulled to tension with a calibrated tool and locked.
05
Safety check and handover
We test every run, clean up the site and show you how to care for the grill.

A normal 2BHK balcony is finished in a single day, usually 3 to 5 hours, with very little drilling dust and no welding.

Care and maintenance

Wipe the cables with a damp cloth once a month — no paint, no oil
Avoid hanging heavy loads or clothes lines on the cables
Call us if a cable ever feels slack; re-tensioning is quick
Sea-facing homes: rinse with fresh water after cyclone season

Why families in Chennai choose YPL

Installing invisible grills since August 2020, with our own trained team
Free site visit and exact measurement before any quote
Installation included in the per-sq-ft price
Offices in T. Nagar, Palavakkam and Pallikaranai for quick visits
Service across Chennai, Tamil Nadu and Andhra Pradesh

Are invisible grills strong enough for children?

Yes. Each tensioned stainless cable holds a load in the region of 400 kg, and the 2–3 inch spacing stops a child from slipping through.

What is the invisible grill price per sq ft in Chennai?

₹110 to ₹350 per sq ft depending on the product and grade — pigeon nets ₹110–180, window grills ₹160–230 and balcony grills ₹220–350. Installation is included and the minimum job is 50 sq ft.

Will an invisible grill rust near the sea?

Not when it is SS 316 marine grade with nylon coating, which is what we recommend for sea-facing homes.

Do invisible grills block the view?

No. The cables are thin and spaced apart, so from a few steps away they almost disappear and light and air pass straight through.

How long does installation take?

Most balconies and windows are finished in one day, usually within 3 to 5 hours.

Can pigeons get through an invisible grill?

Pigeons can pass through standard spacing. If birds are the problem, ask for a pigeon net or a combination of grill and net.

Free site visit

Call the support line

Tell us the opening and we will come and measure it. The visit is free and you get the rate in writing the same day.

Call +91 96000 35014 Email us

Invisible grills: technical specifications

Suitable balconies, windows, staircases, child safety barriers, apartment and high-rise balconies, sliding windows and selected terrace openings. Suitability and access are checked on site.

Specification	Options / installation details
Stainless steel grade	SS 304 / SS 316 (marine grade)
Cable diameter	2 mm / 2.5 mm / 3 mm, depending on the system
Cable finish	Nylon-coated cable / Uncoated stainless steel cable, depending on the product
Cable direction	Vertical installation
Standard cable gap	Approximately 2 inches (50 mm); adjustable to project safety requirements
Frame material	Aluminium frame
Fasteners	Stainless steel bolts and fixing accessories
Appearance	Slim, modern design with minimal obstruction to the outside view
Maintenance	Periodic inspection and cleaning recommended

Grade, diameter and finish are system options, not a promise that every product includes every option. Confirm the selected combination in your written quotation. For a Garware SS 316-grade cable request, ask YPL to confirm brand availability and grade documentation before ordering.

Installation areas

Balcony invisible grills
Window invisible grills
Staircase safety grills
Child safety barriers
Apartment and high-rise building balconies
Sliding windows and selected terrace openings, subject to site suitability

Important quality checks

Confirm the stainless steel grade and cable diameter.
Check cable tension, anchors and frame strength.
Select suitable spacing based on the safety requirements.
Use corrosion-resistant fittings appropriate for the installation environment.
Ask for written warranty terms and installation-service details.

Clean periodically and inspect cables, fixing points and frames. Arrange a professional inspection if you notice loose cables, damaged coating or corrosion; do not adjust cable tension yourself.