YPL Invisible Grill

2026-11-04 · 2 min read

Recent Work: Invisible Grills at a Casagrand Utopia Apartment Balcony

Top-floor corner balcony of a Casagrand Utopia apartment enclosed with vertical invisible grill cables by YPL

Latest completed work: invisible grills on an apartment balcony at Casagrand Utopia. The photos below were taken on site by our team on 15 September 2026.

What we installed

Vertical stainless steel invisible grill cables across the full balcony opening, fitted above the existing black metal railing.

A slim aluminium top track fixed under the balcony ceiling slab and a bottom track along the outer ledge, with stainless fasteners.

Every cable tensioned so the line stays straight and firm across the opening, with no bottom rail to climb.

The balcony stays in daily use – drying and the outdoor view remain exactly as before.

Why vertical cables suit apartment balconies

Vertical cables run from the top track down to the ledge with nothing to stand on, so children are less tempted to climb them. The opening stays clear for cleaning, and the railing keeps its original look and planters.

What the site visit covers

We measure each opening, check what the top and bottom tracks can be fixed to, note the cable grade and finish, and hand over a written quote for the exact area.

Planning invisible grills for your apartment?

Rates start from ₹110 per sq ft with installation included, with a 50 sq ft minimum. Call or WhatsApp +91 96000 35014 to book a site visit and a written quote.

Vertical invisible grill cables fitted on a Casagrand Utopia apartment balcony by YPL – recent work photo 1

Vertical invisible grill cables fitted on a Casagrand Utopia apartment balcony by YPL – recent work photo 2

Vertical invisible grill cables fitted on a Casagrand Utopia apartment balcony by YPL – recent work photo 3

Share:Facebook X LinkedIn WhatsApp

Related installation guides

Invisible grill price in Chennai

We charge per square foot of opening, and the rate includes the cable, anchors, track and installation by our own team. There is no separate labour bill. The minimum job size is 50 sq ft. Your exact rate depends on the cable grade, the spacing and the floor height, which is why every quote starts with a free site visit and a tape measure, not a guess over the phone.

Product	Rate per sq ft	Typical use
Pigeon / bird safety net	₹110 – ₹180	Balconies, ducts, utility areas
Window invisible grill	₹160 – ₹230	Bedroom and kitchen windows, French doors
Balcony invisible grill	₹220 – ₹350	Open balconies, high floors, sea-facing flats

Example job	Approx. area	Guide price
Single bedroom window	50 sq ft (minimum)	₹8,000 – ₹11,500
2BHK balcony	80 sq ft	₹17,600 – ₹28,000
3BHK balcony + utility	140 sq ft	₹30,800 – ₹49,000
Staircase void (villa)	120 sq ft	₹26,400 – ₹42,000

These example figures are worked out from our per-square-foot rates to give you a feel for the budget. Your written quote after the site visit is the final price.

Stainless steel grades we use

Grade	Best for	Why
SS 304	Inland flats, windows, low to mid floors	Good rust resistance at a lower price
SS 314	High floors, wide balconies	Higher strength and heat resistance
SS 316 (marine grade)	Sea-facing homes — ECR, OMR, Besant Nagar, Thiruvanmiyur	Molybdenum content resists salt air corrosion

All cables are nylon coated, which protects the steel from dust and salt, keeps them smooth to touch for children and stops the metallic shine that makes ordinary wire stand out. Cable spacing is 4 inches (100 mm) as standard; where young children or small pets use the opening we fit closer 2 inch (50 mm) spacing instead.

Invisible grill vs MS grill vs safety net

	Invisible grill	MS / iron grill	Safety net
View and light	Almost fully open	Blocked by bars	Slightly hazy
Rust	None (stainless)	Rusts, needs painting	None
Child safety	Very high	High	Medium
Society approval	Usually allowed	Often banned on facade	Usually allowed
Life span	10+ years	Depends on painting	3 – 5 years
Emergency escape	Release panel possible	Difficult	Can be cut

How we install an invisible grill

01
Free site visit
We visit your home, measure every opening and check the wall material and floor height.
02
Written quote
You get a clear per-sq-ft quote with the grade, spacing and total — no hidden charges.
03
Track and anchor fitting
Aluminium tracks are fixed to the top and bottom with anchor bolts suited to concrete, brick or block.
04
Cable tensioning
Each stainless cable is threaded, pulled to tension with a calibrated tool and locked.
05
Safety check and handover
We test every run, clean up the site and show you how to care for the grill.

A normal 2BHK balcony is finished in a single day, usually 3 to 5 hours, with very little drilling dust and no welding.

Care and maintenance

Wipe the cables with a damp cloth once a month — no paint, no oil
Avoid hanging heavy loads or clothes lines on the cables
Call us if a cable ever feels slack; re-tensioning is quick
Sea-facing homes: rinse with fresh water after cyclone season

Why families in Chennai choose YPL

Installing invisible grills since August 2020, with our own trained team
Free site visit and exact measurement before any quote
Installation included in the per-sq-ft price
Offices in T. Nagar, Palavakkam and Pallikaranai for quick visits
Service across Chennai, Tamil Nadu and Andhra Pradesh

Are invisible grills strong enough for children?

Yes. Each tensioned stainless cable holds a load in the region of 400 kg. Our standard 4 inch (100 mm) gap suits older children and adults; where toddlers or small pets use the opening we fit the closer 2 inch (50 mm) spacing, which is what we recommend for that case.

What is the invisible grill price per sq ft in Chennai?

₹110 to ₹350 per sq ft depending on the product and grade — pigeon nets ₹110–180, window grills ₹160–230 and balcony grills ₹220–350. Installation is included and the minimum job is 50 sq ft.

Will an invisible grill rust near the sea?

Not when it is SS 316 marine grade with nylon coating, which is what we recommend for sea-facing homes.

Do invisible grills block the view?

No. The cables are thin and spaced apart, so from a few steps away they almost disappear and light and air pass straight through.

How long does installation take?

Most balconies and windows are finished in one day, usually within 3 to 5 hours.

Can pigeons get through an invisible grill?

Pigeons can pass through standard spacing. If birds are the problem, ask for a pigeon net or a combination of grill and net.

Free site visit

Ask for a free site visit

Tell us the opening and we will come and measure it. The visit is free and you get the rate in writing the same day.

Call +91 96000 35014 Email us

Balcony invisible grills: technical specifications

Balconies in apartments and high-rise buildings, with spacing selected for the safety requirements. Consider SS 316 marine-grade cable and corrosion-resistant fittings for coastal exposure.

Specification	Options / installation details
Stainless steel grade	SS 304 / SS 316 (marine grade)
Cable diameter	2 mm / 2.5 mm / 3 mm, depending on the system
Cable finish	Nylon-coated cable / Uncoated stainless steel cable, depending on the product
Cable direction	Vertical installation
Cable gap	Approximately 4 inches (100 mm) is the standard; a closer 2 inch (50 mm) gap is fitted where young children or small pets use the opening – final spacing is set to project safety requirements
Frame material	Aluminium frame
Fasteners	Stainless steel bolts and fixing accessories
Appearance	Slim, modern design with minimal obstruction to the outside view
Maintenance	Periodic inspection and cleaning recommended

Grade, diameter and finish are system options, not a promise that every product includes every option. Confirm the selected combination in your written quotation. For a Garware SS 316-grade cable request, ask YPL to confirm brand availability and grade documentation before ordering.

Installation areas

Balcony invisible grills
Window invisible grills
Staircase safety grills
Child safety barriers
Apartment and high-rise building balconies
Sliding windows and selected terrace openings, subject to site suitability

Important quality checks

Confirm the stainless steel grade and cable diameter.
Check cable tension, anchors and frame strength.
Select suitable spacing based on the safety requirements.
Use corrosion-resistant fittings appropriate for the installation environment.
Ask for written warranty terms and installation-service details.

Clean periodically and inspect cables, fixing points and frames. Arrange a professional inspection if you notice loose cables, damaged coating or corrosion; do not adjust cable tension yourself.